|
|
|
Description:
The leaving air temperature from the units has a decisive influence
on hot air stratification and consequently on energy saving: for
each centigrade degree of increase in temperature there is a 1.5%
increase in energy consumption. The use of the induction flow optimizer
has the following advantages:
a) energy saving:
- reduced hot air stratification within the building
- reduced operating time of the units with the same ambient temperature.
Energy saving varies between a minimum of 5% and a maximum of 15%,
with maximum assessment in two seasons.
b) environment comfort advantages:
- increased floor-temperature uniformity with greater comfort area
- possibility to install smaller and quieter units, due to the increase
of the throw.
Construction:
The Jetstream induction flow optimizer is composed of a metal frame
which incorporates a set of specialshaped anodised extruded aluminium
louvres moved by a set of manually or motor-controlled levers. The
Jetstream induction flow optimizer can be mounted on the air outlet
af all unit heater Sabiana series Helios or Atlas (up to size 6).
This equipment can also be installed at a later stage andcan be
mounted on all previously installed unit heaters. The Jetstream
induction flow optimizer increases the air speed thanks to the special
shape of its deflecting louvres which allow the creation of various
layers of hot air at the unit heater outlets. The depression created
between the layers induces a lateral aspiration of ambient air that
mixes with the air heated by the unit, thus reducing the leaving
air temperature and increasing the throw. |
|
|