Модэйр инжиниринг - вентиляция и кондиционирование

Descrption:
The Slim Fan Coil Units are for concealed horizontal installation and connection to a small duct system. The figures below are supplied with 3 mm of available pressure.
The Slim Fan Coil Units are manufactured in 3 sizes for hot water supply (2-15 kW) and chilled water supply (2-7 kW).

Construction:
The casing consists of self-supporting panels of hot dip galvanized steel, which are completely insulated with a 3 mm thick thermoacoustic, flame retardant lining.The fan section consists of centrifugal fans in galvanized steel with one or two impellers and a directly coupled, single phase, three speed motor, 220/240 Volt/50 Hz. The heat exchanger is constructed in 3/8" dia expanded copper tubes with aluminium fins with a pitch of 2.1 mm. The steel headers have 1/2" male connections and an extra tapping for an air vent. The heat exchanger is mounted in a galvanized steel carrying frame.

Principal technical data

		Model	SL 13	SL 23	SL 33	SL 14	SL 24	SL 34
Heting	Emission
	High speed	Watt	5470	7860	13600	5920	8590	14680
	Med speed	Watt	4930	6790	12100	5280	7310	13110
	Min speed	Watt	4360	5430	10800	4640	5800	11490
Cooling	Total emission
	High speed	Watt	2480	3440	5850	2620	3930	6600
	Med speed	Watt	2280	3050	5420	2370	3400	5970
	Min speed	Watt	2000	2510	4900	2100	2770	5330
Cooling	Total emission
	High speed	Watt	2000	2810	4750	2080	3070	5160
	Med speed	Watt	1800	2430	4300	1860	2610	4610
	Min speed	Watt	1570	1950	3800	1630	2080	4070
Air Flow	High speed	m3/h	480	700	1200	470	680	1160
	Med speed	m3/h	420	580	1040	410	560	1010
	Min speed	m3/h	360	440	900	350	430	870
Noise level I livelli di pressione acustica sono inferiori a quelli di potenza sonora dr 10 dB(A) per un ambiente di 100 m ed un tempo di riverbero di 0.5 sec.	High speed	dB(A)	52	52	57	52	52	57
	Med speed	dB(A)	49	50	52	49	50	52
	Min speed	dB(A)	45	43	50	45	43	50
Electric motor at high speed	230V - mf 50Hz	W	100	127	175	100	127	175
		A	0.43	0.55	0.78	0.43	0.55	0.78
		µF	2.50	3.15	3.15	2.50	3.15	3.15
Weight		Kg	21.0	28.0	37.0	22.1	29.5	38.8
Water contenance		lt	1.1	1.4	2.1	1.5	1.9	2.9
Dimension	Length	mm	600	600	600	600	600	600
	Width	mm	630	830	1230	630	830	1230
	Heigth mm	250	250	250	250	250	250	250

Note:
The following standard rating conditions are used:
Available pressure 30 Pa

COOLING

Entering air temperature + 27°C d.b.+ 19°C w.b.
Water temperature +7/12°C

HEATING

Entering air temperature + 20°C
Water temperature +70/60°C